...

Contact Us

Please use this form to send us information about your project. Ask us questions, tell us about your project, upload images and or 3D files. One of our team will get back to you shortly. We answer enquiries within 1 hour during the working day. If you require a consultation with us to discuss your project please book an online meeting. We treat your information with a high level of confidentiality. The files will only be used for the purpose of receiving a quote. Please see our Terms & Conditions for more information.

  • F01-03,Jalan PBS 14/2, Taman Perindustrian Bukit Serdang Seri Kembangan 43300 Selangor
  • 3dmaster.hr@gmail.com
  • +6011-233-45586

Ask Your Queries

Shopping Cart

PLA

PHYSICAL PROPERTIES
  • DENSITY : 1.2g/cm³
  • VICAT SOFTENING TEMPERATURE : 53³C
  • HEAT DEFLECTION TEMPERATURE : N/A
  • MELTING TEMPERATURE : 160³C
  • MELT INDEX : 190℃/2.16kg
MECHANICAL PROP.
  • TENSILE STRENGTH : 72 MPa
  • BREAKING EL. RATE : 11 %
  • BENDING MODULUS : 1915 MPa
  • BENDING STRENGTH : 90 MPa
  • IMPACT STRENGTH : 5.4 kJ/m²

AVAILABLE COLOUR : WHITE (#FFFFFF), BLACK (#000000)

FILAMENT TDS
WHAT IS INFILL IN SLA

New SLA infill density available is 0% / 20% /50% / 100%. The denser the infill, the heavier the object. Infill density from 0% to 100% as 0% is no infill and 100% is completely solid. For hollow object, standard wall thickness is set to 2mm. Mostly hollow infill is use in large FIGURINE only. do not apply hollow OR any infill below 100% in GEARS, ENCLOSURE, or any thin wall less than 8mm as it will be too brittle or will cause print failure.

Start from 1 Oct 2023, all files uploaded will be precheck by 3dPRINT-A.i. before queue to print. User can check the status at DASHBOARD. 

WHAT IS INFILL? WHAT DOES IT DO?

BY KARA, ADDITIVE-X

Infill is the structure of the material inside a 3D printed part. Just as the underside of a bridge has interconnecting steelwork, 3D printed parts have an infill that manipulates the part’s physical properties, including strength, structure, and weight.

The infill density is the amount of material used for the infill. The denser the infill, the fuller, heavier and (in theory) the stronger the part. Besides weight and strength, buoyancy and material consumption are also affected by density.

Infill density is measured as a percentage: 0% is hollow, and 100% is solid. Most designers stick to 5% leaps. Standard prints range from 15-50% infill, while functional prints (such as engineering parts) have a 50-100% infill.

Figurines have a lower infill of up to 15%. For flexible parts, the infill provides rigidity, with flexibility determined by the material.

The amount of infill you need depends on what object you are creating.

Start from 1 Oct 2023, all files uploaded will be precheck by 3dPRINT-A.i. before queue to print. User can check the status at DASHBOARD. 

8K PRO MECHANICAL RESIN

A.K.A. Phrozen Rock-Black Stiff 3D Printing Resin create sturdy, flexible models that withstand heat, making it the ideal resin for creating 3D Printed Parts for engineering.

PHYSICAL PROPERTIES
  • DENSITY : 1.14 g/cm³
  • VICAR SOFTENING TEMPERATURE : N/A
  • HEAT DEFLECTION TEMPERATURE : 80³C
  • MELTING TEMPERATURE : N/A
  • MELT INDEX : N/A
MECHANICAL PROP.
  • TENSILE STRENGTH : 34 MPa
  • BREAKING EL. RATE : 4 %
  • BENDING MODULUS : 1300 MPa
  • BENDING STRENGTH : 21-35 MPa
  • IMPACT STRENGTH : 0.45 J/m²

AVAILABLE COLOUR :  BLACK (#000000)

8K HIGH DETAILS FIGURINE RESIN

Phrozen™s 8K 3D Printer Resin is specifically formulated to showcase super-fine detail in full 8K resolution. 

PHYSICAL PROPERTIES
  • DENSITY : 1.12-1.18 g/cm³
  • VICAR SOFTENING TEMPERATURE : N/A
  • HEAT DEFLECTION TEMPERATURE : N/A
  • MELTING TEMPERATURE : N/A
  • MELT INDEX : N/A
MECHANICAL PROP.
  • TENSILE STRENGTH : 21-35 MPa
  • BREAKING EL. RATE : 12-20 %
  • BENDING MODULUS : 1126-1915 MPa
  • BENDING STRENGTH : 21-35 MPa
  • IMPACT STRENGTH : N/A - J/m²

AVAILABLE COLOUR :   WHITE (#FFFFFF), BLACK (#000000), GREY (#5B6579), CRYSTAL CLEAR (COMING SOON)

8K EXTREME HIGH TEMP RESIN

High Temp Resin has the characteristics of high hardness, high strength, high modulus, and high precision. The resin heat resistance is good; Resistance to long-term heating at 120°C or boiling at 100°C.The fully cured high temperature resin material has excellent mechanical properties, weather resistance and temperature resistance.

PHYSICAL PROPERTIES
  • DENSITY : 1.09-1.10 g/cm³
  • VICAR SOFTENING TEMPERATURE : 120³C
  • HEAT DEFLECTION TEMPERATURE : 100 °C
  • MELTING TEMPERATURE : N/A
  • MELT INDEX : N/A
MECHANICAL PROP.
  • TENSILE STRENGTH : 70-85 MPa
  • BREAKING EL. RATE : 35-40 %
  • BENDING MODULUS : N/A
  • BENDING STRENGTH : 95-105 MPa
  • IMPACT STRENGTH : N/A - J/m²

AVAILABLE COLOUR :  BEIGE – ORANGE TINT (#F7E6DE)

8K EXTREME TOUGH RESIN

Tough; Higher toughness and impact resistance than normal ABS like resin Can print rugged and durable parts Excellent mechanical properties. Printed object can be drilled , which is very suitable for mechanical prototypes.

PHYSICAL PROPERTIES
  • DENSITY : 1.08-1.12 g/cm³
  • VICAR SOFTENING TEMPERATURE : N/A
  • HEAT DEFLECTION TEMPERATURE : 67°C
  • MELTING TEMPERATURE : N/A
  • MELT INDEX : N/A
MECHANICAL PROP.
  • TENSILE STRENGTH : 30-60 MPa
  • BREAKING EL. RATE : 11.5 ± 1.0 %
  • BENDING MODULUS : N/A
  • BENDING STRENGTH : 30-75 MPa
  • IMPACT STRENGTH : 40-100 J/m²

AVAILABLE COLOUR :  GREY (#5B6579)

BAMBULAB ABS

ABS is a technical material for 3D printing, known for its superior comprehensive properties
such as high temperature resistance, UV resistance and water resistance. However, the
disadvantage is that it warps easily and stinks when printing. Bambu ABS is designed to
reduce warping and cracking but maintain outstanding impact resistance. In addition, it’s
very suitable for high-speed printing because of its good flow behavior.

PHYSICAL PROPERTIES
  • DENSITY : 1.05 g/cm³
  • VICAR SOFTENING TEMPERATURE : 94 °C
  • HEAT DEFLECTION TEMPERATURE : 87 °C
  • MELTING TEMPERATURE : 200 °C
  • MELT INDEX : 34.2 ± 3.8 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 33 ± 3 MPa
  • BREAKING EL. RATE : 10.5 ± 1.0 %
  • BENDING MODULUS : 1880 ± 110 MPa
  • BENDING STRENGTH : 62 ± 4 MPa
  • IMPACT STRENGTH : 39 ± 3.6 kJ/m²

AVAILABLE COLOUR :  WHITE (#FFFFFF), BLACK (#000000), GREY (#5B6579), YELLOW (#F4EE2A), RED (#C12E1F), PURPLE (#5E43B7), BLUE (#0A2989), PINK (#F55A74)

FILAMENT TDS

BAMBULAB TPU 95-A

TPU is a popular flexible filament for 3D printing because of its durability. It’s commonly used
to create 3D printing parts that can be flexed, stretched, and blended, and it is not easily
breakable. However, flexibility means it’s not suitable for high-speed printing. Bambu TPU
95A is designed for elastic and abrasion resistant parts with a Shore hardness of 95A.

PHYSICAL PROPERTIES
  • DENSITY : 1.16 g/cm³
  • VICAR SOFTENING TEMPERATURE : N/A
  • HEAT DEFLECTION TEMPERATURE : N/A
  • MELTING TEMPERATURE : 185³C
  • MELT INDEX : 5.2 ± 0.3 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 29.6 ± 0.6 MPa
  • BREAKING EL. RATE : > 700%
  • BENDING MODULUS : N/A
  • BENDING STRENGTH : N/A
  • IMPACT STRENGTH : N/A

AVAILABLE COLOUR : WHITE (#FFFFFF), BLACK (#000000)

FILAMENT TDS

BAMBULAB PC (POLYCARBONATE)

PC (Polycarbonate) is an extremely tough and durable material for 3D printing, with good
temperature and impact resistance. It is highly recommended for high strength 3D printing
applications. It’s also a naturally transparent thermoplastic. Bambu PC Basic is designed for
less shrinkage and better dimensional stability. It’s a professional level 3D printing material.

PHYSICAL PROPERTIES
  • DENSITY : 1.20 g/cm³
  • VICAR SOFTENING TEMPERATURE : 119³C
  • HEAT DEFLECTION TEMPERATURE : 117³C
  • MELTING TEMPERATURE : 228³C
  • MELT INDEX : 32.2 ± 2.9 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 55 ± 4 MPa
  • BREAKING EL. RATE : 3.8 ± 0.3 %
  • BENDING MODULUS : 2310 ± 70 MPa
  • BENDING STRENGTH : 108 ± 4 MPa
  • IMPACT STRENGTH : 34.8 ± 2.1 kJ/m²

AVAILABLE COLOUR : WHITE (#FFFFFF), BLACK (#000000)

FILAMENT TDS

BAMBULAB AERO

Bambu PLA Aero achieves low density and light weight by foaming at high temperatures during printing and creating small holes inside the prints. It’s the perfect choice for light-weight and energy-saving prints, including unmanned aerial vehicles (UAVs), aerodynamic models, and gliders.

PHYSICAL PROPERTIES
  • DENSITY : 1.21 g/cm³
  • VICAR SOFTENING TEMPERATURE : 56 °C
  • HEAT DEFLECTION TEMPERATURE : 54°C
  • MELTING TEMPERATURE : 154 °C
  • MELT INDEX : 5.0 ± 0.6 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 26 ± 2 MPa
  • BREAKING EL. RATE : 2.2 ± 0.8 %
  • BENDING MODULUS : 1960 ± 110 MPa
  • BENDING STRENGTH : 42 ± 3 MPa
  • IMPACT STRENGTH : 24.5 ± 1.7 kJ/m²

AVAILABLE COLOUR : WHITE (#FFFFFF)

FILAMENT TDS

BAMBULAB PA6-CF

Bambu Lab’s PLA filament stands out for its high print speed, and excellent appearance. Experience the benefits of smooth and flawless prints with superior quality that exceeds expectations. Bambu high performance filaments, PA6-CF keeps superior stiffness and strength properties in dry environments, it is perfect for printing load-bearing structural components.

PHYSICAL PROPERTIES
  • DENSITY : 1.09 g/cm³
  • VICAR SOFTENING TEMPERATURE : 212 °C
  • HEAT DEFLECTION TEMPERATURE : 186 °C
  • MELTING TEMPERATURE : 223 °C
  • MELT INDEX : 6.8 ± 0.6 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 102 ± 7 MPa
  • BREAKING EL. RATE : 5.8 ± 1.6 %
  • BENDING MODULUS : 5460 ± 280 MPa
  • BENDING STRENGTH : 151 ± 8 MPa
  • IMPACT STRENGTH : 40.3 ± 2.5 kJ/m²

AVAILABLE COLOUR : BLACK (#000000)

FILAMENT TDS

BAMBULAB PETG

Known for impact and water resistance, high flexibility, strong layer adhesion, Bambu PETG Basic is ideal for printing tools (vises, tensioners, bag clips), toys (frisbees, boomerangs), water containers (bottles, watering cans), and outdoor items (planter pots, bottle cages) that require long-term exposure and withstanding impacts.

PHYSICAL PROPERTIES
  • DENSITY : 1.24g/cm³
  • VICAR SOFTENING TEMPERATURE : 57³C
  • HEAT DEFLECTION TEMPERATURE : 57³C
  • MELTING TEMPERATURE : 160³C
  • MELT INDEX : 18.6 ± 2.2 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 32 ± 4 MPa
  • BREAKING EL. RATE : 11.2 ± 0.8 %
  • BENDING MODULUS : 1670 ± 120 MPa
  • BENDING STRENGTH : 65 ± 4 MPa
  • IMPACT STRENGTH : 52.7 ± 2.4 kJ/m²

AVAILABLE COLOUR : WHITE (#FFFFFF), BLACK (#000000)

FILAMENT TDS

BAMBULAB PLA

Bambu Lab’s PLA filament stands out for its high print speed, and excellent appearance. Experience the benefits of smooth and flawless prints with superior quality that exceeds expectations.

PHYSICAL PROPERTIES
  • DENSITY : 1.24g/cm³
  • VICAR SOFTENING TEMPERATURE : 57³C
  • HEAT DEFLECTION TEMPERATURE : 57³C
  • MELTING TEMPERATURE : 160³C
  • MELT INDEX : 42.4 ± 3.5 g/10 min
MECHANICAL PROP.
  • TENSILE STRENGTH : 35 ± 4 MPa
  • BREAKING EL. RATE : 12.2 ± 1.8 %
  • BENDING MODULUS : 2750 ± 160 MPa
  • BENDING STRENGTH : 76 ± 5 MPa
  • IMPACT STRENGTH : 26.6 ± 2.8 kJ/m²

AVAILABLE COLOUR : TRANSPARENT, WHITE (#FFFFFF), BLACK (#000000), GREY (#5B6579), YELLOW (#F4EE2A), ORANGE (#FF6A13), RED (#C12E1F), PURPLE (#5E43B7), BLUE (#0A2989), GREEN #16C344, PINK (#F55A74)

FILAMENT TDS
A-schematic-of-the-FDM-printing-process
lines-on-side-of-print-1024x1024-1-1024x1024

What Is FDM 3D Printing?

Fused deposition modeling, or FDM for short, is a material extrusion method of additive manufacturing where materials are extruded through a nozzle and joined together to create 3D objects.

A typical FDM 3D printer, therefore, takes a polymer-based filament and forces it through a heated nozzle, which melts the material and deposits it in 2D layers on the build platform. While still warm, these layers fuse with each other to eventually create a three-dimensional part.

Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.